3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V

180.00

Model: HX-3S-01 Overload voltage range: 4.25-4.35 v 0.05 v Overpressure voltage range: 2.3-3.0 v 0.05 v Size: 50 * 16 * 1.0mm Maximum operating current: 5-8A Operating temperature: -40 — 50 & # 8451; Current at rest: less than 6uA useful life: more than 30,000 hours Internal…

Description

Model: HX-3S-01
Overload voltage range: 4.25-4.35 v 0.05 v
Overpressure voltage range: 2.3-3.0 v 0.05 v
Size: 50 * 16 * 1.0mm

Maximum operating current: 5-8A Operating temperature: -40 — 50 & # 8451;
Current at rest: less than 6uA useful life: more than 30,000 hours
Internal resistance: less than 60m short circuit protection: protection, self-recovery delay.
the size of the protection board and description of the device;
The size protection board is 50 * 16 * 1.0mm;components for the Seiko S-8254AA protection chip and genuine FDS 4435A * 4;
note:
The protection board cannot be used for polymer battery iron, battery hand drill, electric fish battery machine, electric bicycle battery, 2 and then in series 24 V use, 775 (4A) above of the motor, 1 W fish eye LED light.
described in the power range for the following products:
vacuum cleaner battery massager, LED light backup power supply, 12V electronic products, solar battery street lamp, backup power supply monitor, and other products.
Explanation description:
3 string (for 3 18650 lithium polymer batteries or batteries combination in series)
10.8 V (nominal voltage of lithium polymers)
11.1 V (18650 or 3.7 V lithium battery voltage)
12.6 V (lithium battery is fully charged after voltage)
10A discharge (referring to the maximum discharge current limit)
lithium battery protection plate
Comes with: overload, over discharge, over current, short circuit protection
18650 lithium battery should.

3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V

Reviews

There are no reviews yet.

Be the first to review “3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V”

Your email address will not be published. Required fields are marked *